LTC3552-1 - Standalone Linear Li-Ion Battery Charger and Dual Synchronous Buck Converter

特長

  • Programmable Charge Current Up to 950mA
  • Complete Linear Charger and Dual DC/DC Regulator
  • Dual Fixed Outputs:
     1.8V at 800mA
     1.575V at 400mA
  • No MOSFET, Sense Resistor or Blocking Diode Required
  • Thermal Regulation Maximizes Charge Rate Without Risk of Overheating*
  • Charges Directly from a USB Port
  • Programmable Charge Current Termination
  • Preset 4.2V Charge Voltage with ±1% Accuracy
  • Charge Current Monitor Output for Gas Gauging
  • Automatic Recharge
  • Charge Status Output
  • “Power Present” Output
  • Soft-Start Limits Inrush Current
  • Low Quiescent Current Buck Converter (40μA)
  • Current Mode Operation, Constant Frequency (2.25MHz)
  • Low Profi le (5mm × 3mm × 0.75mm) DFN Package

標準的性能特性

LTC3552-1 Typical Application
LTC3552-1 Typical Application

概要

The LTC3552-1 is a complete constant-current/constantvoltage linear charger and dual fi xed output DC/DC converter for single cell lithium-ion batteries. Its DFN package and low external component count make the LTC3552-1 ideally suited for portable applications. Furthermore, the LTC3552-1 is designed to work within USB power specifi cations.

No external sense resistor or external blocking diode are required due to the internal MOSFET architecture. The charge voltage is fixed at 4.2V and the charge current is programmed with a resistor. The charge cycle terminates when the charge current drops below the programmed termination threshold after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the LTC3552-1 enters a low current state dropping the battery drain current to less than 2μA. Thermal regulation maximizes charge rate without risk of overheating.

The synchronous step-down switching regulators generate fi xed output voltages of 1.8V and 1.575V. The switching frequency is set at 2.25MHz, allowing the use of small surface mount inductors and capacitors.

パッケージ

パッケージの最新情報ならびに図面については、パッケージング情報を参照してください。

DFN-16

LTC3552-1 Package Drawing

発注情報

各種パッケージと価格

製品番号 パッケージ ピン 温度 価格(1~99個時) 価格(1000個時)* RoHSデータ
LTC3552EDHC DFN 16 E $3.29 $2.30 見る
LTC3552EDHC#PBF DFN 16 E $3.29 $2.30 見る
LTC3552EDHC#TR DFN 16 E $2.36 見る
LTC3552EDHC#TRPBF DFN 16 E $2.36 見る
LTC3552EDHC-1 DFN 16 E $3.29 $2.30 見る
LTC3552EDHC-1#PBF DFN 16 E $3.29 $2.30 見る
LTC3552EDHC-1#TR DFN 16 E $2.36 見る
LTC3552EDHC-1#TRPBF DFN 16 E $2.36 見る
購入サンプルリクエスト
* 米ドル価格は、米国内における定められた数量に対する工場渡しでの単価です。変更される可能性がありますので、予算目的でのみご使用願います。米国以外の国における価格は、輸送費、税金、手数料、為替レートにより変動する場合があります。注文個数に応じた価格および納期については、リニアテクノロジー正規代理店までお問い合わせください。

評価キット

リニアテクノロジーのデモボードは、認定のお客様に無料で提供されます。デモボードをご希望の場合は、最寄りのセールスオフィスまたは代理店 にお問い合わせください。一部のデモボードは、このWebページ上でクレジットでもご購入いただけます。デモボードは評価目的でのみご使用ください。実際の最終アプリケーションにおける動作検証と信頼性の確認は、お客様の責任において行っていただきますようお願いいたし ます。

ここをクリック 全デモボードリストがご覧いただけます。

アプリケーション

  • Cellular Telephones, PDAs, MP3 Players
  • Bluetooth Applications

シミュレーション

LTspice IV は無料で提供される強力な回路シミュレータと回路図入力、波形ビューワに改善を加え、スイッチング・レギュレータのシミュレーションを容易にするためのモデルを搭載しています。 LTspice IV、その他のシミュレーションツールはここからダウンロードできます。 Design Simulation page.

Related models available in LTspice IV
LTC3552-1
LTC3552

技術サポート

  • 技術的なお問い合わせは技術的質問フォームからお願いします。回答は内容、状況に応じて当社または当社代理店からになります。

  • お急ぎの場合は当社代理店 もしくはこちらにご連絡下さい。1-800-4-LINEAR (US customers only) 、 408-432-1900。